System Board - HP Mini 210-1010 Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal material.
Description
Includes Intel Atom N450 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB and Digital
Media Card Reader
Includes Intel Atom N450 1.66-GHz processor with 512-KB level 2 cache, 667-MHz FSB, but does
not include Digital Media Card Reader
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
6. Disconnect the hard drive cable from the system board (see
7. Disconnect the WWAN antenna cables from the WWAN module (see
on page
8. Disconnect the WLAN antenna cables from the WLAN module (see
9. Remove the keyboard (see
10. Remove the top cover (see
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
SIM (see
●
WWAN module (see
●
WLAN module (see
●
Memory module (see
●
RTC battery (see
●
Fan/heat sink assembly (see
Remove the system board:
1. Disconnect the display panel cable (1) from the system board.
Battery on page
43).
Keyboard on page
Top cover on page
SIM on page 39)
WWAN module on page
WLAN module on page
Memory module on page
RTC battery on page
Fan/heat sink assembly on page
38).
Service cover on page
49).
52).
43)
45)
47)
48)
40).
Hard drive on page
WWAN module
WLAN module on page
63)
Component replacement procedures
Spare part number
589638-001
589639-001
41).
45).
61