Table of Contents
Advertisement
6.
Release the ZIF connector (2) to which the TouchPad cable is connected, and then disconnect
the TouchPad cable (3) from the system board.
7.
Remove the five Phillips PM2.0×6.0 screws that secure the top cover to the base enclosure.
8.
Release the top cover (1) by lifting the rear edge until it disengages from the base enclosure.
Component replacement procedures
53
- Quick Links:
- Computer Major Components
- Hard Drive
- Memory Module
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Mini 210-1010 and is the answer not in the manual?
Questions and answers