Speakers - HP Mini 210-1010 Maintenance And Service Manual

Speakers

Description
Speakers (include cables)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Service cover (see
b. Keyboard (see
c. Top cover (see
Remove the speakers:
1. Turn the top cover upside down, with the front toward you.
2. Release the TouchPad cable (1) from the top cover. (The TouchPad cable is attached to the top
cover with double-sided adhesive).
3. Release the speaker cable from the clips (2) built into the TouchPad bracket.
4. Remove the two Phillips PM2.0×4.0 screws (3) that secure the speakers to the top cover.
5. Remove the speakers (4).
Reverse this procedure to install the speakers.
Battery on page 38).
Service cover on page
Keyboard on page 49).
Top cover on page 52).
40).
Component replacement procedures
Spare part number
596153-001
55