Table of Contents
Advertisement
4
Removal and replacement procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE:
As you remove each subassembly from the device, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION:
Use care when handling the plastic parts. Apply pressure only at the points designated in the
maintenance instructions.
Using excessive force during disassembly and reassembly can damage plastic parts.
Preliminary replacement requirements
31
- Quick Links:
- Computer Major Components
- Hard Drive
- Memory Module
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Mini 210-1010 and is the answer not in the manual?
Questions and answers