Download Print this page

HP Mini 210-1010 Maintenance And Service Manual Page 72

Hp mini 210-1010: reference guide.
Hide thumbs

Advertisement

4.
Remove the fan/heat sink assembly (3).
NOTE:
assembly and system board components, it may be necessary to move the fan/heat sink
assembly from side to side to detach it from the system board.
NOTE:
assembly and the system board each time the fan/heat sink assembly is removed: Thermal
paste is used on the processor (1) and the fan/heat sink assembly section (2) that services it.
Reverse this procedure to install the fan/heat sink assembly.
64
Chapter 4 Removal and replacement procedures
Due to the adhesive quality of the thermal material located between the fan/heat sink
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink

Advertisement

   Also See for HP Mini 210-1010

   Related Manuals for HP Mini 210-1010

Comments to this Manuals

Symbols: 0
Latest comments: