5.6 Switch Cover
✎
The switch cover is included in the Plastics and Hardware Kit
(spare part number 251365-001).
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the rear panel
facing you.
3. Remove the two black M2 × 9 screws (Figure 5-9).
Figure 5-9. Removing the Switch Cover Screws
4. Turn the computer top side up with the front facing you.
5. Open the computer as far as it will open.
Maintenance and Service Guide
Removal and Replacement Procedures
5–11