Compaq Evo N160 Series Maintenance And Service Manual page 105

Removal and Replacement Procedures
6. Remove the two black M2 × 9 screws 1 that secure the left
display support to the base enclosure (Figure 5-27).
7. Remove the left display support 2.
✎
The left display support is included in the Plastics and Hardware
Kit (spare part number 251365-001).
8. Remove the silver M2 × 5 screw 3 that secures the system
board to the base enclosure.
Figure 5-27. Removing the Left Display Support and System
5–38
Board Screw
Maintenance and Service Guide