Compaq Evo N160 Series Maintenance And Service Manual page 90

13. Remove the black M2 × 12 screw 1 that secures the left
display hinge (Figure 5-17).
✎
Note the orientation and position of the display hinge bracket 2.
Take special care not to lose this bracket when replacing the
display.
14. Remove the silver M2 × 10.5 screw 3 that secures the right
display hinge.
15. Lift the display straight up to remove it 4.
Figure 5-17. Removing the Display
Reverse the above procedure to install the display.
Maintenance and Service Guide
Removal and Replacement Procedures
5–23