Removal and Replacement Procedures
5.13 Disk Cell RTC Battery
✎
The disk cell RTC battery is included in the Plastics and
Hardware Kit (spare part number 251365-001).
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. Switch cover (Section 5.6)
b. Keyboard and keyboard shield (Section 5.7)
c. Display (Section 5.10)
d. Top cover (Sevtion 5-11)
2. Lift up the back edge of the RTC battery and remove it from
its socket on the system board (Figure 5-22).
Figure 5-22. Removing the Disk Cell RTC Battery
Reverse the above procedure to install the disk cell RTC battery.
5–30
Maintenance and Service Guide