Bluetooth Module - HP Envy 14-1050 Maintenance And Service Manual

5. Remove the audio/USB board (5) and cable.
Reverse this procedure to install the audio/USB board and cable.

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 608385-001.
Description
Bluetooth module (with gasket)
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery (see
5. Remove the memory module/wireless module compartment cover (see
on page
6.
Remove the top cover (see
62 Chapter 4 Removal and replacement procedures
47).
Top cover on page
Battery on page 39).
56).
Spare part number
625485-001
WLAN module