HP Envy 14-1050 Maintenance And Service Manual page 48

2. Remove the battery cover. The battery cover is included in the Door Kit, spare part numbers
608384-001 (for use only with standard computer models) and 629879-001 (for use only with
Beats Edition computer models).
3. Slide the right battery release latch (1) to unlock the battery.
4. Slide and hold the left battery release latch (2) to release the battery.
5. Pull the battery tab (3), and then remove the battery from the computer.
To insert the battery:
1. Align the tabs on the front edge of the battery with the notches on the front edge of the battery
bay.
2. Rotate the rear edge of the battery down into the battery bay until it is seated.
3. Slide the right battery release latch to lock the battery into place. (The left battery release latch will
automatically lock into place.)
4. Replace the battery cover, and then slide the battery cover back until it is seated. (The battery
cover release latch will automatically lock into place.)
40 Chapter 4 Removal and replacement procedures