HP Envy 14-1050 Maintenance And Service Manual page 83

Description
Intel Core i3-350M 2.26-GHz, 25W processor (1066-MHz FSB, 3-MB L3 cache, Dual Core)
Intel Pentium P6200 2.13-GHz processor 3-MB L3 cache, 1066-MHz FSB
Intel Pentium P6100 2.00-GHz processor 3-MB L3 cache, 1066-MHz FSB
Intel Pentium P6000 1.86-GHz processor 3-MB L3 cache, 1066-MHz FSB
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery (see
5. Remove the hard drive (see
6. Remove the memory module/wireless module compartment cover (see
on page 47).
7. Disconnect the battery charger board ribbon cable from the system board (see
board on page 54).
8. Remove the top cover (see
9. Disconnect the optical drive cable from the system board (see
10. Remove the system board (see
11. Remove the fan/heat sink assembly (see
Remove the processor:
1. Turn the processor locking screw (1) one-half turn counterclockwise, until you hear a click.
Battery on page
Mass storage device on page
Top cover on page 56).
System board on page
Fan/heat sink assembly on page
39).
41).
WLAN module
Optical drive on page
68).
72).
Component replacement procedures
Spare part number
597623-001
625831-001
613587-001
613586-001
Battery connector
65).
75