HP Envy 14-1050 Maintenance And Service Manual page 50

Description
Hard drive (includes hard drive bracket):
750-GB, 7200-rpm
640-GB, 7200-rpm
640-GB, 5400-rpm
500-GB, 7200-rpm
320-GB, 7200-rpm
250-GB, 7200-rpm
750-GB, 5400-rpm only (does not include hard drive bracket or screws)
Solid-state drive (includes hard drive bracket):
256-GB
160-GB
Hard Drive Hardware Kit (includes hard drive bracket and screws)
Before removing the mass storage device, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery (see
42 Chapter 4 Removal and replacement procedures
Battery on page 39).
Spare part number
633252-001
621046-001
631161-001
634919-001
603783-001
608369-001
634250-001
608368-001
608367-001
608373-001