Table of Contents
Advertisement
The GX400 is a radio transmitting device.
•
Do not transmit near electrical blasting equipment or in explosive atmospheres.
•
Do not allow children to operate a radio transmitter unsupervised.
•
The antenna used for this radio must be properly installed and maintained and must
provide a separation distance of at least 34 cm (13.4 inches) from all persons and must
not be collocated or operated in conjunction with any other antenna or transmitter.
Never transmit if any person is closer than the specified distance to the antenna.
•
Changes or modifications to this product or use of accessories not expressly approved by
GME, or operation of this product in any way other than as provided in the GME Owner's
Manual could void your authority to operate this product.
Congratulations. You have just purchased one of the most technically advanced 27 MHz radios
in the world.
The GME GX400 is a 27 MHz AM radio that combines both Marine and Citizens Band functions
into the one radio. The GX400 has a number of enhanced features including fully user
programmable channel scanning, safety channel selection (Channel 88 in marine mode, Channel
8 in CB mode), speaker microphone, two Priority channels and a backlit Liquid Crystal Display
(LCD) with dimming function.
With its compact size and IPX7 design it can easily be installed into almost any mounting
location in your boat, motor vehicle, motor cycle etc.
Please read this manual thoroughly to ensure you get the best from the GX400's features.
For users in New Zealand, United States of America, Canada, South Africa or Papua New Guinea,
please refer to amendment for local frequencies, channel allocations and licensing requirements.
•
Do not install the radio near an airbag or in an area where an airbag may deploy. If an
airbag is obstructed by the radio, it may not deploy as expected. It could also propel the
radio with enough force to cause serious injury.
•
Avoid touching the heat sink at the rear of the radio while the radio is in use. The heat sink
can become hot during prolonged use.
•
Do not install the radio in front of a vehicle heater. The radio requires a cool airflow over the
rear heat sink when transmitting to maintain efficiency.
•
Do not make unapproved modifications to the radio. Such modifications could void the
warranty and cause the radio to operate outside its approved specifications.
Cabin cover
Mounting bracket and gimbal knobs
Mounting hardware
G X 4 0 0
WARNING/SAFETY INFORMATION
INTRODUCTION
INSTALLATION GUIDELINES
SUPPLIED WITH
I N S T R U C T I O N M A N U A L
Microphone bracket
DC power lead
Instruction manual
3
Advertisement
Table of Contents
