Specifications - GME G-COM GX400B Instruction Manual

27 mhz radio
Table of Contents

Advertisement

GENERAL
Frequency Range: 26 – 30 MHz
TRANSMITTER
Max Modulation Depth: 100%
Carrier Output Power: 4 watts max
Spurious Emissions: < – 26 dBm
RECEIVER
Receive Sensitivity for 12 dB
SINAD @ 30%Modulation: – 110 dBm
Adjacent Channel Selectivity: ≥ 55 dB
Spurious Response Immunity: ≥ 55 dB
Conducted Spurious Radiation ≤ – 57 dBm
Audio Output Power 8 Ohms: 2.5 watts
MECHANICAL
ENVIRONMENTAL
Temperature Range: – 0°C to + 55°C
The GX400 will operate over the 26 – 30 MHz frequency range. For information specific to
frequencies outside of the Australian Marine or the Australian and New Zealand CB bands,
please refer to the appropriate amendment, or contact GME at: export@gme.net.au
*All specifications are typical and subject to change without notice or obligation.
1 8

SPECIFICATIONS*

Complies with: AS4367:2007
Channel Set: Australian 27 MHz CB (26.965 – 27.405 MHz)
Australian Marine (27.680 – 27.980 MHz)
Modulation: AM (A3E)
Supply Voltage: • 12 V DC nominal
• 10.8 – 15.6 V DC range
Frequency Error: ±1.4 kHz
Dual Watch: Monitor time – 250 ms
Scan Rate: 5 channels/second
Max Squelch: < – 65 dBm
Dimensions: 65 (H) x 75 (D) x 164 (W) mm
Weight: 602 grams
I N S T R U C T I O N M A N U A L
G X 4 0 0

Advertisement

Table of Contents
loading

This manual is also suitable for:

G-com gx400

Table of Contents