HP Compaq tc1100 Hardware And Software Manual page 99

Selecting a View
In the Portrait-Primary and Portrait-Secondary views, the image
is displayed vertically, in portrait orientation. In the Landscape-
Primary and Landscape-Secondary views, the image is displayed
horizontally, in landscape orientation.
■
A portrait view is often optimal when you are using the
tablet PC as a handheld.
■
A landscape view is often optimal when you are displaying
the image on an optional external monitor or projector.
In the primary views (Portrait-Primary and Landscape-Primary),
the image switches clockwise between vertical and horizontal.
In the secondary views (Portrait-Secondary and Landscape-
Secondary), the image switches counterclockwise between
vertical and horizontal.
■
Left-handed users may find the secondary views more
convenient.
■
It is recommended that you not use a secondary view
while using the internal wireless. The positions commonly
occupied by the tablet PC, external devices, and users while
the tablet PC is in a secondary view may obstruct the
antennae.
When you are facing the tablet PC screen with the tablet PC
in portrait orientation, the antennae, not visible from the
outside of the tablet PC, are on the right and left sides of the
tablet PC, near the upper corners.
To switch the system among the Portrait-Primary, Landscape-
Primary, Portrait-Secondary, and Landscape-Secondary views:
1. Press the Q button.
2. Select a view from the Q Menu.
For more information about using the Q Menu, including
instructions for adding or removing items from the Q Menu,
refer to
Hardware and Software Guide
Chapter 12, "Q Menu Software."
Pen and Command Controls
4–13