Setting System Information Options - HP Compaq tc1100 Hardware And Software Manual

Setting System Information Options

1. Shut down the tablet PC. If you are not sure whether the
tablet PC is off or in hibernation, turn the tablet PC on by
sliding the power button, and then shut down the tablet PC
through the operating system.
2. Be sure that the hard drive is inserted into the tablet PC
(not into an optional docking device or external MultiBay).
3. To open Computer Setup, turn on or restart the tablet PC.
Press
displayed in the lower-left corner of the screen.
❏
❏
4. To confirm the information or your preferences, press
5. To save your information or preferences, use the arrow keys
to select File > Save changes and exit, and then follow the
instructions on the screen.
Your preferences are set when you exit Computer Setup and take
effect when the tablet PC restarts.
Hardware and Software Guide
while the F10 = ROM Based Setup message is
f10
To change the language, press
For navigation instructions, press
Ä
Access or set your preferences by following these
directions:
◆
To view general system information, select File >
System Information.
◆
To view or enter identification values for system
components, select Security > System IDs.
f2.
f1.
Security
f10.
14–20