Setting Command Control Preferences - HP Compaq tc1100 Hardware And Software Manual

Jog Dial
Press or rotate the jog dial manually to enter commands or scroll
vertically:
■
Press inward to simulate the function of the
standard keyboard.
■
Rotate upward or downward to scroll toward the top or
bottom of an image.
At the default setting, the jog dial scrolls line by line like the up
and down arrow keys on a standard keyboard. The jog dial can be
set to scroll page by page like the page up and page down keys on
a standard keyboard or three lines at a time like a mouse wheel.
Other settings, in addition to scroll functions, are also available.
For instructions, refer to
Preferences,"

Setting Command Control Preferences

All command controls except the enter function of the jog dial
can be customized to launch applications, simulate key
combinations, or perform preset system functions.
Each programmable command control can be assigned to
4 settings. Each setting applies only to 1 of 4 views:
■
Portrait-Primary
■
Portrait-Secondary
■
Landscape-Primary
■
Landscape-Secondary
Command control preferences are set in the Tablet and Pen
Settings window. You must select a view before setting a
preference. Each view is illustrated in the Button Location pane
of the Tablet and Pen Settings window as you select it.
If you are unfamiliar with the 4 views, you may want to read
"Selecting a View"
control preference.
Hardware and Software Guide
"Setting Command Control
next in this chapter.
next in this section, before setting a command
Pen and Command Controls
key on a
enter
4–12