Advanced Menu - HP Compaq tc1100 Hardware And Software Manual

Advanced Menu

Select
Language (or press f2)
Boot options
Device options
Hardware and Software Guide
To Do This
Change the Computer Setup language.
■
Enable/Disable MultiBoot, which sets a
startup sequence that can include most
bootable devices and media in the
system. For details, refer to
"MultiBoot."
■
Set the boot order.
■
Swap the functions of the fn key and left
ctrl key.
■
Enable/Disable multiple pointing devices
at startup. (To set the tablet PC to support
only a single, usually nonstandard,
pointing device at startup, select Disable.)
■
Enable/Disable USB legacy support for a
USB keyboard, mouse, and hub. When
USB legacy support is enabled:
❐
A USB keyboard, mouse, and hub work
even when a Windows operating
system is not loaded.
❐
The tablet PC starts from a bootable
hard drive, diskette drive diskette, or
CD, CD-RW, or DVD inserted into a
drive connected by a USB connector
to the tablet PC or to an optional
docking device.
■
Select a parallel port mode: EPP
(Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced
Capabilities Port).
■
Enable/Disable all settings in the
SpeedStep window. (When Disable
is selected, the tablet PC runs in Battery
Optimized mode.)
Computer Setup
Appendix B,
15–7