Entering Drivelock Passwords; Requiring A Drivelock Password At Restart - HP Compaq tc1100 Hardware And Software Manual

Entering DriveLock Passwords

1. Be sure that the hard drive is inserted into the tablet PC
(not into an optional docking device or external MultiBay).
2. When prompted for a DriveLock password, type your user
or master password (using the same kind of keys you used
to set the password), and then press
✎
After 2 incorrect attempts to enter the password, you must
restart the tablet PC and try again.

Requiring a Drivelock Password at Restart

You can require that a DriveLock password be entered each time
the tablet PC is restarted. Enable and disable this feature in
Computer Setup:
1. Shut down the tablet PC. If you are not sure whether the
tablet PC is off or in hibernation, turn the tablet PC on by
sliding the power button, and then shut down the tablet PC
through the operating system.
2. Be sure that the hard drive is inserted into the tablet PC
(not into an optional docking device or external MultiBay).
3. Open Computer Setup by turning on or restarting the
tablet PC. Press
message is displayed in the lower-left corner of the screen.
❏
❏
4. Use the arrow keys to select Security > Password options >
Require password on restart.
Hardware and Software Guide
f10
To change the language, press
For navigation instructions, press
while the F10 = ROM Based Setup
f2.
enter.
f1.
Security
14–15