Led And Beeper Indications - Datalogic Gryphon I GM4100-BK Quick Reference Manual

LED and Beeper Indications

The reader's beeper sounds and its LED illuminates to indicate
various functions or errors on the reader. An optional "Green
Spot" also performs useful functions. The following tables list
these indications. One exception to the behaviors listed in the ta-
bles is that the reader's functions are programmable, and may or
may not be turned on. For example, certain indications such as
the power-up beep can be disabled using programming barcode
labels.
INDICATION
Power-up Beep
Good Read Beep
ROM Failure
Limited Scan-
ning Label Read
Reader Active
Mode
Quick Reference Guide
DESCRIPTION
The reader is in
the process of
powering-up.
A label has been
successfully
scanned by the
reader.
There is an error
in the reader's
software/pro-
gramming
Indicates that a
host connection
is not established
when the IBM or
USB interface is
enabled.
The reader is
active and ready
to scan.
LED and Beeper Indications
LED
LED behavior
for this indica-
tion is configu-
rable via the
feature "Good
Read: When to
Indicate"
(see the PRG for
information.)
Flashes
N/A
The LED is lit
a
steadily
BEEPER
Reader beeps
four times at
highest fre-
quency and vol-
ume upon
power-up.
The reader will
beep once at cur-
rent frequency,
volume, mono/
bi-tonal setting
and duration
upon a success-
ful label scan.
Reader sounds
one error beep at
highest volume.
Reader 'chirps'
six times at the
highest fre-
quency and cur-
rent volume.
N/A
35