Table of Contents
Advertisement
20. Auto Sleep (Command2 : n)
G If there is no input signal, the set turn off automatically
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0: Off
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
21. Horizontal Shift (Command2 : v)
G
To adjust picture to left/right as you prefer.
Transmission
[k][v][ ][Set ID][ ][Data][Cr]
Data 0 : 0~c6
Acknowledgement
[v][ ][Set ID][ ][OK][Data][x]
22. Verical Shift (Command2 : w)
G
To adjust picture to up/down as you prefer.
Transmission
[k][w][ ][Set ID][ ][Data][Cr]
Data 0 : 0 ~ 27
Acknowledgement
[w][ ][Set ID][ ][OK][Data][x]
38
38
after 10 minutes.
1: On
23. Auto Configure (Command2 : ~)
G To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
[k][~][ ][Set ID][ ][Data][Cr]
Data 1: Auto Configure start
Acknowledgement
[~][ ][Set ID][ ][OK][Data][x]
24. Reset (Command2 : !)
G
To return to the good picture reproduction pro-
grammed at the factory and cannot be changed.
Transmission
[k][!][ ][Set ID][ ][Data][Cr]
Data 1 : Reset start
Acknowledgement
[!][ ][Set ID][ ][OK][Data][x]
25. On screen language selection (Command2 : ^)
G To select your desired language.
Transmission
[k][^][ ][Set ID][ ][Data][Cr]
Data 0 : English
3 : Italy
1 : German
4 : Spain
2 : French
Acknowledgement
[^][ ][Set ID][ ][OK][Data][x]
Advertisement
Table of Contents
