Table of Contents
Advertisement
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]
* [Command 2]
* [Set ID]
* [DATA]
* [Cr]
* [ ]
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][x]
* The Monitor transmits ACK (acknowledgement) based on
this format when receiving abnormal data from
non-viable functions or communication errors.
34
34
: k
: To control PDP set.
: You can adjust the set ID to choose
desired monitor ID number in special
menu. See previous page.
Adjustment range is 1 ~ 99.
When selecting Set ID '0', every
connected PDP set is controlled.
: To transmit command data.
Transmit 'FF' data to read status of
command.
: Carriage Return
ASCII code '0x0D'
: ASCII code 'space (0x20)'
01. Power (Command2 : a)
G To control Power On/Off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off
1 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
G To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Data 0 : Power Off
1 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
* In like manner, if other functions transmit 'FF' data based
on this format, Acknowledgement data feed back presents
status about each function.
02. Input Select (Command2 : m) (Main Picture Input)
G To select input source for the set.
You can also select an input source using the INPUT
SELECT button on the set's remote control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0 : TV
4 : Component
1 : AV1
5 : RGB-PC
2 : AV2
6 : RGB-DTV
3 : S-Video
7 : RGB-DVI
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Advertisement
Table of Contents
