Dear consumer! Thank you for purchasing the TFT-LCD color television. To enjoy the features of this unit and to ensure safety and years of trouble-free operation, be sure to carefully read this manual and follow the instructions contained herein Contents Contents ....................
Caution Never attempt your own maintenance. If something appears strange, please turn the TV off and consult your TV dealer. The TV is composed of many delicate electronic components that can be damaged or broken if you open the TV or attempt to modify it.
Power indicator light Standby power switch Volumedecrease_simulation adjustment Volume increase_simulation adjustment Menu button Channel decrease_function selection Channel increase+function selection TV/AV push button Remote receiver 10. Earphone jack 11. TFT-LCD BACK A/V input jack External antenna jack Power switch Collapsible antenna Bracket stand A/V/DC input jack DC 12V socket...
Remote control Audio system selection Mute button Sleep time-switch Recall button Direct channel selection Digital channel selection Display mode Standby power switch Volume increase/decrease simulation adjustment 10. Menu button 11. Channel increase function selection 12. Channel decrease function selection 13. lmage left/right 14.
Page 6
If you haven't searched for you local channels before you need to do an automatic or manual search. Forth is specific operation process, please prefer to the menu operation on PG3. Menu operation Image Adjustment First press the menu button; you can now see the corresponding content about the image as follows (see the picture).
Page 7
Color system: Usethe "V+" or"V-" button to switch the colorsystem. The typesthat can be selected are: AUTO, PAL, P3.58, N3.58, N4.43, SECAM-L, R\L M and PAL N. AUTOcolor system is alwaysthe color system the device automatically selects. If you want to adjustthe colorsystem, you need to knowthe color system that your localTV broadcasters use.
Page 8
Now press the"V+" or "V-" button to set it to "00:00", and then use the "V+" button again to increase the time by one minute in turn (To a maximum of 59 min). Once you havereached the maximum and the button is pressed again theclockwill goback to zero minute.
Page 9
Broadcast Frequency Band: Use the "CH+"or"CH-" buttonto select thisitem, then pressthe "V+" or "V-"button to select the broadcast frequency band you want.Those available are: VHF-L, VHL-H.UHF. Manual fine-tuning: Usethe "CH+" or"CH-" button to select this item,then press the"V+" or "V-" button tostart the manual fine-tuning of the programs you are watching.
Before you request repair service The following occurrences do not indicatethat the television is faulty. Before you request repair, follow the listed methods to checkthe device. Occurrences Possible reasons No picture andsound Battery pack isexhausted or notmaking contact, AC adapter orautomobile adapter is not properly connected.