Table of Contents
Advertisement
PC Setup
You can adjust horizontal/vertical position, clock, phase, and
auto-configure, reset as you prefer.
Press the MENU button and then
D D
the SPECIAL menu.
Press the
G G
button and then
D D
/
E E
desired picture item.
F F
G G
Press the
/
button to make appropriate adjustments.
H-Position / V-Position
This function is to adjust picture to left/right and up/down
as you prefer.
Clock
This function is to minimize any vertical bars or stripes vis-
ible on the screen background. And the horizontal screen
size will also change.
Phase
This function allows you to remove any horizontal noise
and clear or sharpen the image of characters.
WXGA
To see a normal picture, match the resolution of RGB mode and selection of XGA mode.
SPECIAL
SPECIAL
Language
CSM
PC Control
WXGA
Set ID
Caption
Caption/Text
()OO}{OOOKOOMENU
Auto-configure
This function is for the automatic adjustment of the screen
position, clock and phase. The displayed image will disappear
button to select
for a few seconds while the Auto-configuration is in progress.
/
E E
button to select the
Reset
This function allows you to return to the good picture repro-
duction programmed at the factory and cannot be
changed.
Note : Some signal from some graphics boards may not
function properly. If the results are unsatisfactory, adjust
your monitorÕs position, clock and phase manually.
Press the OK button to store it for the PC monitor picture.
Press the EXIT button to return to PC mode.
Language
H-Pos.
0
CSM
V-Pos.
0
PC Control
PC Control
Clock
10
WXGA
Phase 15
Set ID
Auto
Caption
Reset
Caption/Text
()OO}{OOOKOOMENU
SPECIAL
Language
CSM
PC Control
WXGA
WXGA
Off
Set ID
On
Caption
Caption/Text
()OO}{OOOKOOMENU
EN
29
Advertisement
Table of Contents
