Stereo/Dual/Nicam Reception - Hyundai HLT-3010 Owner's Manual

Stereo/Dual/NICAM reception

In AV mode, you can select output sound for the left and
right loudspeakers.
Repeatedly press the I/II button to select the sound output.
L+R :Audio signal from audio L input is sent to left loud-
speaker and audio signal from audio R input is sent to right
loudspeaker.
L+L : Audio signal from audio L input is sent to left and right
loudspeakers.
R+R : Audio signal from audio R input is sent to left and
right loud-speakers.
Mono sound selection
In stereo reception if the stereo signal is weak, you can
switch to mono by pressing the I/II button twice. In mono
reception the depth of sound is improved. To switch back to
stereo, press the I/II button twice again.
Language selection for dual language broadcast
If a programme received in two languages (dual language),
you can switch to DUAL I , DUAL II or
ing the I/II button repeatedly.
DUAL I sends the primary broadcast language to the loud-
speakers.
DUAL II sends the secondary broadcast language to the
loudspeakers.
DUAL I+II sends a separate language to each loudspeaker.
If your set is equipped with the receiver for NICAM recep-
tion, the high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be
received.
Sound output can be selected according to the type of
received broadcast as follows by pressing the I/II button
repeatedly.
When NICAM mono is received, you can select
MONO or FM MONO.
When NICAM stereo is received, you can select
STEREO or FM MONO. If the stereo signal is weak, switch
to FM mono.
When NICAM dual is received, you can select
DUAL I , NICAM DUAL II or NICAM DUAL I+II
MONO . When FM mono is selected the display
appears on the screen.
DUAL I+II by press-
NICAM
NICAM
NICAM
or
MONO
EN
21