Installation Instructions - Friedrich CHILL CP08 Installation And Operation Manual

Table of Contents

Advertisement

Installation Instructions

Read these instructions completely and carefully.
Tools You Will Need
❒ Phillips-head screwdriver
❒ Flat-blade screwdriver
❒ Ruler or tape measure
Before You Begin
NOTE TO INSTALLER: Leave these
instructions with the air conditioner after
installation is complete.
NOTE TO CONSUMER: Keep this Installation
and Operation Manual for future use.
Important notes:
It is recommended that proper attire be worn
during installation.
For personal safety, this air conditioner must
be properly grounded.
It is important to have the wall outlet and circuit
checked by a qualified electrician if there is any
doubt as to whether a proper ground exists.
❒ Scissors or knife
❒ Pencil
❒ Level
❒ Hammer
CAUTION:
Do not under any circumstances, cut or remove
the third (ground) prong from the power cord.
Do not change the plug on the power cord of
this air conditioner.
Aluminum house wiring may present special
problems ; consult a qualified electrician.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Chill cp06Chill cp08g10a

Table of Contents