30
Opening Conduit Drill Guides
ON/ OFF/
Indication
Inverter
configuration
or reboot
Inverter
firmware
upgrade
Error
The following table describes production percentage of AC information by LED color
and ON/OFF/P switch position.
Indication
Percentage of AC
Production:
0 %
Percentage of AC
Production:
0 - 33 %
Percentage of AC
Production:
33 - 66 %
Percentage of AC
Production:
66 - 100 %
Opening Conduit Drill Guides
This step may be performed before or after mounting the inverter.
To open conduit drill guides:
1. Move the Safety Switch ON/OFF/P switch and the inverter ON/OFF/P switch to OFF.
2. Loosen the screws on the front cover of the Safety Switch, as shown below:
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00541-1.4
P
Switch
Red
Position
ON / P
ON
ON / P
Alternating Alternating
Any
ON
ON/
OFF/ P
Switch
Position
ON (1)
LED Color
Green
ON
Alternating
ON/ OFF/
ON/ OFF /
Blinking/
Blinking
Flickering
LED Color
Red
Green
OFF
OFF
OFF
ON
OFF
OFF
OFF
ON
Comment
Blue
ON
The upgrade
process can take
up to 5 minutes
Refer to Errors
and
Troubleshooting
on page 62
Comment
Blue
OFF
This indicates
OFF
power
production as
percentage of
rated peak AC
ON
output power
ON