Compaq 486 Maintenance And Service Manual page 35

1202 - 21 Modem timed out waiting
for SYNC (analog loopback
answer mode)
1202 - 22 Modem timed out waiting
for modem response (analog
loopback answer mode)
1202 - 23 Modem exceeded data
block retry limit (analog
loopback answer mode)
1203 - xx Modem External
Termination Test
1203 - 01 Modem external
TIP/RING failure
1203 - 02 Modem external DATA
TIP/RING failure
1203 - 03 Modem line termination
failure
1204 - xx Modem Auto Originate
Test
1205 - xx Modem Auto Answer
Test
-----------------------------------------------------------------------------
Error
Code Description
-----------------------------------------------------------------------------
1206 - xx Dial Multifrequency Tone
Test
1210 - xx Modem Direct Connect
Test
1210 - 01 Modem timed out waiting
for SYNC
1210 - 02 Modem timed out waiting
for response
1210 - 03 Modem exceeded data
block retry limit
1210 - 04 RCV exceeded carrier
lost limit
1210 - 05 XMIT exceeded carrier
lost limit
1210 - 06 Time out waiting for dial
tone
1210 - 07 Dial number string too
long
documentation for
Configuration utility
procedures.
2. Check the modem line.
3. Replace the modem
and retest.
Recommended
Action
The following steps apply
to error codes 1201 - xx
through 1210 - xx:
1. Refer to modem
documentation for
Configuration utility
procedures.
2. Check the modem line.
3. Replace the modem
and retest.