Compaq 486 Maintenance And Service Manual page 37

select test failed
1716 - xx Fixed disk drive conditional
format test failed
1717 - xx Fixed disk drive Error Correction
Code test failed
1719 - xx Fixed disk drive power
mode test
1719 - 01 Exceeded maximum soft
error limit
1719 - 02 Exceeded maximum hard
error limit
1719 - 03 Previously exceeded
maximum soft error limit
1719 - 04 Previously exceeded
maximum hard error limit
1719 - 05 Failed to reset controller
1719 - 06 Fatal error while reading
1719 - 07 Fatal error while writing
-----------------------------------------------------------------------------
Error
Code Description
-----------------------------------------------------------------------------
1719 - 08 Failed compare of
write/read/compare
1719 - 09 Failed to format a track
1719 - 10 Failed sector wrap test
1719 - 19 Controller failed to
deallocate bad sector
1719 - 40 Failed cylinder 0
1719 - 41 Drive not ready
1719 - 42 Recalibrate failed
1719 - 43 Failed to format bad
track
1719 - 44 Failed fixed disk drive
controller diagnostics
1719 - 45 Failed to get drive
parameters from ROM
1719 - 46 Invalid drive parameters
found in ROM
drive and retest.
2. Replace the power
distribution board and
retest.
3. Replace the I/O board
and retest.
Recommended
Action
The following steps apply
to error codes 1700 - xx
through 1719 - xx:
1. Replace the fixed disk
drive and retest.
2. Replace the power
distribution board
and retest.
3. Replace the I/O board
and retest.