Compaq 486 Maintenance And Service Manual page 26

204 - 02 Error during saving
program memory in
address test
-----------------------------------------------------------------------------
Error
Code Description
-----------------------------------------------------------------------------
204 - 03 Error during restore of
program memory in
address test
204 - 04 A20 address test failed
204 - 05 Page hit address test
failed
205 - 01 Walking 1/0 test failed
205 - 02 Error during saving
program memory in
walking 1/0 test
205 - 03 Error during restore of
program memory in
walking 1/0 test
205 - 04 Insufficient memory
to perform test
206 - xx Increment pattern test
failed
208 - 01 Memory refresh test
failed
208 - 02 Error during saving
program memory in
refresh test
208 - 03 Error during restore
program memory in
fresh test
-----------------------------------------------------------------------------
Error
Code Description
-----------------------------------------------------------------------------
210 - xx Random Pattern Test
Failed
210 - 01 Data read from block did
not match data written
210 - 02 Scan of test block prior to
testing
210 - 05 Inverted pattern compare,
RAM correct
210 - 10 Mapping LIM block, LIM
Recommended
Action
The following steps apply
to error codes 203 - xx
through 211 - xx:
1. Replace the memory
module and retest.
2. Replace the processor
board and retest.
Recommended
Action
The following steps apply
to error codes 203 - xx
through 211 - xx:
1. Replace the memory
module and retest.
2. Replace the processor
board and retest.