Emerson CARRERA GRANDE ECO CF788CK00 Owner's Manual page 3

EMERSON QUICK START GUIDE
The Quick Start Guide covers the installation
instructions common for ceiling fan operations. If
additional assistance with wiring, alternate hanging
systems, or lighting options, proceed to the complete
instructions of this Owner's Manual.
The Quick Start Guide sections include page numbers
to correspond with the appropriate sections of the
Owner's Manual for detailed instructions.
* See Unpacking Instructions for a complete list of
parts for installation.
How to Put Your Ceiling Fan Together (page 6)
1. Unscrew and discard each
shipping retainer screw and
retainer.
2. Attach the blade flanges to
the fan blades.
3. Attach the blade/flange
assembly to the motor hub.
Installation of Downrod (page 8)
1. Remove the hanger ball from
the downrod.
2. Install the downrod to the
motor coupling using the
clevis pin and hairpin clip.
3. Tighten the setscrews.
1. Disconnect electrical power to
the branch circuit at the
circuit breaker or fuse box
before attempting to install
the ceiling fan hanger bracket
on the outlet box.
WARNING
!
Turning off wall switch is not sufficient. To avoid possible electrical
shock, be sure electricity is turned off at the main fuse or circuit
breaker box before wiring. All wiring must be in accordance with
National and Local codes and the ceiling fan must be properly
grounded as a precaution against possible electrical shock.
Hanging Your Ceiling Fan (page 10)
CEILING
AT LEAST
7'
FLOOR
!
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked "Acceptable for Fan
Support of 22.7 kg. (50 lbs.) or less", and use screws
supplied with outlet box. Most outlet boxes commonly used
for support of light fixtures are not acceptable for fan
support and may need to be replaced. Consult a qualified
electrician if in doubt.
Installation of Switch Housing (page 7)
1. Tuck blue and white wires
carefeully under the switch
housing cover and attach
witht he three switch housing
mounting screws.
WARNING
!
Turning off wall switch is not sufficient. To avoid possible electrical
shock, be sure electricity is turned off at the main fuse or circuit
breaker box before wiring. All wiring must be in accordance with
National and Local codes and the ceiling fan must be properly
grounded as a precaution against possible electrical shock.
Installation of Ceiling Fan (pages 8 and 9)
1. Install the coupler cover and
ceiling cover onto the
downrod.
2. Reinstall the hanger ball onto
the downrod, place the pin
into the hanger ball and
tighten the setscrew.
2. The fan must be hung with at
least 7' of clearance from
floor to blades.
3. Attach the hanger bracket to
the outlet box.
4. Seat the hanger ball/downrod
assembly on the hanger
bracket.
3
WARNING
ETL Model No.: CF788