Switching The Display And Image (Fn+F4); Adjusting System Volume (Fn+F5); Initiating Quick Controls (Fn+F6) - Compaq Armada M700 Series Reference Manual

Switching the Display and Image (Fn+F4)

In Windows 95, Windows NT 4.0, or Windows 2000
Professional—Toggle
computer display, external display(s), and simultaneous display.
The external displays can be connected through the external
monitor connector or the composite video-out jack.
In Windows 98—
When MultiMonitor is enabled, press
external display connected to the external monitor connector
and disable MultiMonitor.
When MultiMonitor is disabled, toggle
image among the computer display, external display(s), and
simultaneous display. The external displays can be connected
through the external monitor connector or the composite
video-out jack.

Adjusting System Volume (Fn+F5)

To adjust system volume with an on-screen slide button or
with the keyboard arrow keys, press
To mute or restore volume
Press
or
Press

Initiating Quick Controls (Fn+F6)

Quick Controls security features disable the keyboard and
pointing device and clear the screen. Before you can use Quick
Controls, you must set a power-on password and enable Quick
Control preferences. For instructions, refer to Chapter 6.
To initiate Quick Controls manually, press
To exit Quick Controls, enter your power-on password.
The
Fn+F6
connected through a USB connector on the computer or an
optional docking base.
2-6 Using the Keyboard
Fn+F4
Fn+F5+M
then select or clear the Mute checkbox.
Fn+F5,
hotkeys cannot be used on an external keyboard
to switch the image among the
Fn+F4
Fn+F4
Fn+F5.
to turn off an
to switch the
Fn+F6.