Removing A Hard Drive Assembly From The Multibay - Compaq Armada M700 Series Reference Manual

Removing a Hard Drive Assembly from the MultiBay

1. Save your work, then shut down the computer.
2. Close the display.
3. With the MultiBay facing you, tilt the computer up 1.
4. Slide the MultiBay release latch toward the opening of the
MultiBay 2.
5. Pull the hard drive assembly (the hard drive inserted into the
MultiBay hard drive adapter) out of the MultiBay by grasping
the notch on the bottom of the drive 3.
Using Drives 5-7