Switch Display And Image (Fn+F4); Adjust System Volume (Fn+F5); Initiate Quicklock (Fn+F6) - Compaq Evo N200 Hardware Manual

Keyboard and Pointing Device

Switch Display and Image (Fn+F4)

Fn+F4
external monitor connector. Toggle the
the image among:
I
Computer display
I
External display
I
Simultaneous display (computer and external displays)
✎
You can set the default display to internal display, external
display, or simultaneous display in the Setup utility. Changing the
default display does not affect the function of the
For more information about the Setup utility, refer on this CD to
the Utilities guide.

Adjust System Volume (Fn+F5)

Press
Fn+F5
the slide bar upward to increase volume or downward to decrease
volume.
To mute or restore volume, press
Mute check box.

Initiate QuickLock (Fn+F6)

When QuickLock is enabled, you can lock the computer at any
time by pressing
power-on password.
QuickLock cannot be initiated until a power-on password is set
and QuickLock is enabled. For instructions, refer on this CD to
the Utilities guide, "Security" section.
3–4
supports any external display device connected through the
to display a system volume slide bar. Click and drag
Fn+F6.
Fn+F5,
To unlock the computer, enter the
hotkeys to switch
Fn+F4
Fn+F6
then select or clear the
Hardware Guide
hotkeys.