StarTech.com SV431DPUA2 Quick Start Manual

Quick-start guide
4-Port USB KVM Switch - DisplayPort - 4K 60Hz
SV431DPUA2
FR: Guide de l'utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l'uso - it.startech.com
Package contents
• 1 x KVM switch
• 4 x foot pads
• 1 x universal power adapter (NA/JP, EU, UK, ANZ)
• 1 x quick-start guide
Requirements
• DisplayPort cables
• USB-A to USB-B or USB-C to USB-B cables
• 3.5 mm audio cables
• Computer system or video card enabled with DisplayPort
• Computer system enabled with USB
• Display device (for example, monitor, projector, TV, and so on)
enabled with DisplayPort
• Standard wired or wireless USB keyboard
• Standard wired or wireless USB mouse
Requirements are subject to change. For the latest requirements,
please visit www.StarTech.com/SV431DPUA2.
Product diagram
Front view
Port selection/link LEDs
Port selection buttons
For the latest information, technical specifications, and support for
this product, please visit www.StarTech.com/SV431DPUA2
Back view
Console
DisplayPort
Port
Power
adapter
port
Installation
Set up your PC
The following setup changes are required for PC users and aren't
necessary if you're using a Mac computer.
1. In Standard CMOS, set Halt on Error to All But Keyboard.
2. In PNP and PCI Setup, set PNP OS Installed to Yes.
3. In PNP and PCI Setup, set USB IRQ to Enabled.
Connect the console to the KVM switch
1. Turn off your computer and any devices or peripherals that are
connected to it (for example, printers, external hard drives, and so
on).
2. Connect a monitor or display to the console DisplayPort port.
3. Do one of the following:
Power LED
4. If necessary, do any of the following:
*actual product may vary from photos
Console
USB hub
audio
ports
ports
USB HID
ports
• Connect a keyboard and a mouse to the USB keyboard and
mouse ports.
• If you're using a combination wireless keyboard and mouse,
connect the wireless receiver to the keyboard port.
• Connect speakers to the console audio speaker port.
• Connect a microphone to the console mic port.
• Connect USB peripherals to the USB hub ports.
PC
DisplayPort
port
PC
PC
audio
USB
ports
port
Manual Revision: 02/15/2018