StarTech.com SV431DPUA Instruction Manual

StarTech.com SV431DPUA Instruction Manual

4-port professional usb, displayport kvm switch with audio
Hide thumbs Also See for SV431DPUA:

Advertisement

SV431DPUA
Instruction Manual
DisplayPort KVM Switch
4-Port Professional USB,
DisplayPort KVM Switch
with Audio

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SV431DPUA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for StarTech.com SV431DPUA

  • Page 1 SV431DPUA Instruction Manual DisplayPort KVM Switch 4-Port Professional USB, DisplayPort KVM Switch with Audio...
  • Page 2 StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
  • Page 3: Table Of Contents

    Table of Contents Introduction ..............1 Packaging Contents..............1 System Requirements ..............1 Installation ............... 1 Hardware Installation ..............2 Front View ..................2 Rear View ..................2 Driver Installation .................4 Operation ................. 4 Front Panel ..................4 HotKey Control ................5 Alternative Hotkey Commands ............8 Specifications ..............10 Technical Support ............
  • Page 4: Introduction

    Introduction Packaging Contents • 1 x SV431DPUA KVM switch • 1 x Power Adapter • 1 x Rubber Feet • 1 x Instruction Manual System Requirements • DisplayPort enabled computer system • USB enabled computer system • Standard 104-key USB keyboard •...
  • Page 5: Hardware Installation

    Hardware Installation Front View PC Port Power/ Selection LED KVM Power Port Selection Buttons Rear View Console DisplayPort PC4 Port PC3 Port PC2 Port PC1 Port port USB Hub External ports power port USB keyboard/ 3.5mm speaker/ mouse ports MIC ports...
  • Page 6 *installation pictures are representations only Plug a monitor into the Console’s DisplayPort connector; plug a USB keyboard and a USB mouse into the dedicated USB keyboard and mouse ports on the KVM switch. Use a male-to-male DisplayPort video cable to connect the DisplayPort connector on the computer’s video card, to one of the KVM’s PC ports (i.e.
  • Page 7: Driver Installation

    OPTIONAL: Connect any other USB peripherals you wish to share between the connected computers/devices to the extra USB Hub ports on the Console side. Connect the external power adapter from a wall outlet to the power connector on the rear panel of the KVM switch. Power up the first computer/device and wait for it to fully boot and test keyboard/mouse functionality.
  • Page 8: Hotkey Control

    AutoScan The system automatically scans through the power-on computers in sequence with a fixed interval (see Scan Time below). To activate AutoScan, press front panel push buttons “3” and “4” simultaneously. The port selection LED will flash during AutoScan. AutoScan will select active computers only. To exit AutoScan mode, just press any one of the front panel push buttons.
  • Page 9 To select a computer: Left <CTRL> + Left <CTRL> + 1 (Example: Selects the computer at port 1.) Left <CTRL> + Left <CTRL> + 2 (Example: Selects the computer at port 2.) NOTE: Do not use the keypad on the right-side of the keyboard. Auto Scan The KVM automatically scans through the powered-on computers in sequence on a fixed time interval (see Scan Time below).
  • Page 10: Audio Stick

    Scan Time Four options are available for users to set the Scan Time duration, it Includes 3, 8, 15 and 30 seconds. Note: Scan Time is set to 3 seconds by default. To adjust Scan Rate, set the scan time of duration before switching to the next computer: Left <CTRL>...
  • Page 11: Alternative Hotkey Commands

    USB 1: pressing the hotkey below to turn ON/OFF the USB-Port Rule: Left <CTRL> + Left <CTRL> + F7 To change the port that the USB hub stays on to the currently selected port, press the following hotkey: Left <CTRL> + Left <CTRL> + U NOTE: Please make sure that linking procedure of USB device has been accomplished before switching to the next computer.
  • Page 12 For those keyboards that do not have or support <ScrollLock>, please press and HOLD the Left <SHIFT> and press <NumLock> twice instead of pressing Left <CTRL> twice. To select a computer: Hold Left <SHIFT> + Press <NumLock> + Press <NumLock> then release <SHIFT>...
  • Page 13: Specifications

    Specifications Number of Ports 1 x DisplayPort Computer Connectors 1 x USB type B (per port) 2 x 3.5mm mini-jack 1 x DisplayPort Console Connectors 4 x USB type A 2 x 3.5mm mini-jack 2560x1600@60Hz Maximum Video Resolution (higher resolutions may be supported at lower refresh rates) DDC2B Support Audio...
  • Page 14: Technical Support

    Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or...
  • Page 15 StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server...

Table of Contents