Direct IP Idis DC-S6261X Operation Manual page 26

Part 1 - Remote Setup
Miscellaneous
Select the Miscellaneous tab and configure
miscellaneous settings.
• Focus Mode: Choose a Focus Mode. If the camera
image is changed by moving the object or changing
the zoom magnification, it is required to adjust the
focus.
- Manual: Allows you to adjust the focus manually
using remote programs.
- Auto: The camera changes its focus automatically
whenever a change occurs in the image.
- Auto – One Push: The camera changes its focus
automatically only for the first change in the image
after PTZ movement changes. If another change
occurs after that, this setting must be adjusted
manually.
• PTZ Reset: Click the button to reset the camera's pan/
tilt/zoom location.
• Home Position: Specify the camera's home position.
- Default: Uses the factory-default position as the
camera's home position.
- User Setting: Uses the user-defined position as the
home position. Select Setup to change the home
position.
• Auto Run: Specify which action to take if the camera
has not been controlled for the specified duration of
time.
• Auto Pan: Specify the camera's panning direction.
When Auto Pan is selected from a remote program,
the camera pans in the direction selected here.
26
• Auto Flip: Automatically flips the image when the
camera tilts past 90° to prevent the objects from
appearing upside down.
- Digital: Flips the image left to right or top to
bottom.
- Mechanical: Automatically pans or tilts the camera.
- Off: Disables Auto Flip.
• Azimuth: Specify whether to use the azimuth display
function.
- Due north setup: Click the Setup button to change
the due north direction position.
• Restore: Specify whether to restore the camera to its
last position or function. Enabling this option restores
the camera to its last position or function after being
restarted.
• Periodic Moving: Pan and Tilt move the entire range
of motion at a set interval for a set period of time,
and then move to the last position or perform the last
function.