Direct IP Idis DC-S6261X Operation Manual page 25

- Speed: Specify the preset speed.
• Run: Select a tour profile and then click the Run
button to perform the tour function.
• Edit: Used to edit the selected tour profile.
• Remove: Used to remove the selected tour profile.
Schedule
Select the Schedule tab and configure schedule settings.
The schedule setting can be used only when the PTZ
funtions –Preset, Scan, Pattern, and etc.–are set up. The
maximum set schedule is up to 32.
Allows you to make the PTZ functions operate at the set
sime.
• Repeat: Allows you to make the configurred Scan,
Tour, and Pattern operate depending on the Interval.
When the interval is set up as None, the functions will
continue for a set period of time.
• Once: Allows you to make the configurred Scan, Tour,
Pattern, Preset, PTZ Reset, and Wiper operate once at
a specified time.
• Draw: Set up the schedule.
• Erase: Delete the schedule.
Part 1 - Remote Setup
25