Table of Contents
Advertisement
Q UI CK M OUNT ING T I PS
WIND SPEED
Ensure the sensor is mounted vertically – an unobstructed rooftop is ideal.
• Your wind sensor should be the tallest object in the area to avoid educed wind speed values.
RA IN
Mount in an open area, preferably off the ground on a level platform.
• Clean out the bucket regularly to avoid debris; this can affect readings.
T HERMO-HYGR O
Keep out of direct sunlight & ensure the sensor is well-ventilated.
• We recommend mounting it on a north-facing wall under an eave or deck for best results.
For detailed sensor setup and mounting instructions, see
B UT TO N FUNC T IO NS
Buttons located on top of Profesional Weather Station
Buttons located on the right side of Professional Weather Station
SET
TEMP, WIND, RAIN
LIGHT
+ or –
+ & –
SENSOR
DAILY, HOURLY
RAIN & LIGHT
EXTRA SENSOR
Wi-Fi Professional Station
Hold for basic setting. Press to view Wi-Fi status.
Press to view history.
Press to adjust brightness. Hold to set Auto Dim.
Use + or – to adjust values in settings.
Hold both buttons to search for Wi-Fi.
Press to view sensor ID numbers, then hold PLUS (+) to search, or hold MINUS (–) to
remove.
Press to see forecast. Must be connected to Wi-Fi.
Hold both buttons together to reset all sensor ID's and Wi-Fi settings.
Press to toggle through "extra sensor" & Barometric Pressure. Hold to add Sensors.
page
25.
Page | 4
Advertisement
Table of Contents
