Quick Setup; Quick Mounting Tips; Button Functions - La Crosse Technology V21-WTHV3 Manual

Q UI CK S ET UP
1. Insert 2 - C batteries into your LTV-W2 Wind Sensor.
2. Insert 2 - AA batteries into your LTV-TH1 Thermo-Hygro Sensor.
3. 5 volt power cord (required) into V21-WTHv3 station
*3-AA batteries for optional backup of your time and date
4. Download the La Crosse View™ App (App Store or Google Play)
5. Follow along with our instructional videos to connect your station to the app:
http://bit.ly/LaCrosseView_Support_Vid_01_1
http://bit.ly/LaCrosseView_Support_Vid_01_2
4. Mount your sensors in appropriate locations.
*Battery operation only, station will not update sensor or Wi-Fi data. Power cord is required.
QU I CK MO UNT IN G T IP S
W IND SPEED
Ensure the sensor is mounted vertically – an unobstructed rooftop is ideal.
• Your wind sensor should be the tallest object in the area to avoid educed wind speed values.
THE RM O -HYGR O
Keep out of direct sunlight & ensure the sensor is well-ventilated.
• We recommend mounting it on a north-facing wall under an eave or deck for best results.
B UT TO N FUNC T IO NS
Buttons located on top of your Wind Station
ALERTS
WIND, TEMP
+ or –
+ & –
SET
SENSOR
LIGHT
ALERTS & LIGHT
Wi-Fi Wind Station
Hold to set alerts. Press to confirm setting and move to next alert.
Press to view history.
Use + or – to adjust values in settings. Hold to adjust quickly.
Hold both buttons to search for Wi-Fi.
Press to view Wi-Fi Status. Hold for basic settings.
Press to view sensor ID numbers, then hold PLUS (+) to search, or hold
MINUS (–) to remove.
Press to adjust brightness.
Hold both to Factory Reset Station.
All sensor ID's, History, and Wi-Fi settings will be reset.
Page | 3