Table of Contents
Advertisement
SENSORS
Sensor Placement & Mounting
For Accurate Glide Pro Sensor Measurements
For optimal battery life, ensure the Solar Panel is facing south.
Ideally, the Glide Pro Sensor should be mounted on the tallest
object in your area. Avoid positioning the sensor parallel
or below eaves, roof lines, trees, or other objects that may
obstruct wind speed readings.
Make sure the screws on the Wind Cups and Mounting
are securely fastened.
The maximum wireless transmission range to the display is up
to 400 feet (121.92 m) in open air, not including walls or floors.
The Glide Pro Sensor should be mounted with the Wind Cups
on the top.
For Accurate Thermo-Hygro Sensor Measurements
Insert a mounting screw through the hole at the top to securely
mount the sensor. It can also hang from the back using a nail.
Mount the sensor vertically in a protected well-shaded area.
Keeping it out of direct weather elements such as sunlight, rain,
snow, etc. will help avoid inaccurate readings.
The maximum wireless transmission range to the display is up
to 400 feet (121.92 m.) in open air, not including walls or floors.
For additional protection against weather elements, a Sensor
Weather Shield (bit.ly/weather-shield) is available for purchase.
For video instructions, visit:
Bracket
bit.ly/th_sensor_mounting
19
Advertisement
Table of Contents
