About The Audio Features; Adjust Speaker Volume - Honeywell ScanPal EDA5S User Manual

Good Read LED Descriptions
LED Color
Green
Blinking green
Red

About the Audio Features

The EDA5S has multiple speakers, three microphones, and several software
settings to configure sound volume or enable vibration feedback.

Adjust Speaker Volume

Use the Volume buttons on the left side of the computer to adjust the volume of
ringtones, media, notifications, and alarms.
Note: The volume setting varies by OS version.
To quickly change the active speaker volume level:
To access the volume quick set menu:
1. Press the Volume button.
2. Adjust the volume level using the on-screen menu.
EDA5S Mobile Computer Series User Guide
Good Read LED
Description
Good read of a barcode.
The data collection imager is processing or starting up.
Failure to scan barcode.
Check to make sure you have the correct symbology enabled.
• Press the top of the Volume button (+) to raise the volume of the active
speaker.
• Press the bottom of the Volume button (-) to lower the volume of the active
speaker.
• Tap the icon at the top to toggle the media volume between Sound On
Vibrate Only , or Silent .
,
15