Scan Status LED Descriptions
LED Color
Green
Red
About Audio Features
EDA51K has multiple speakers, a microphone, and several software tools to
configure sound volume or enable vibration feedback.
Adjust Speaker Volume
Use the Volume button on the side of the computer to adjust the volume of
ringtones, media, notifications, and alarms.
Note: The volume setting varies by OS version.
To quickly change the active speaker volume level:
•
•
To access the volume quick set menu:
1. Press the center of the Volume button.
2. Adjust the volume level using the on-screen menu.
14
Scan Status LED
Description
Good read of a bar code.
Failure to scan bar code.
Check to make sure you have the correct symbology enabled.
Press the top of the Volume button (+) to raise the volume of the active speaker.
Press the bottom of the Volume button (-) to lower the volume of the active
speaker.
•
Tap the icon at the top to toggle the media volume between sound on
vibrate only
, and silent
•
Use the slider to adjust the media volume.
•
Tap
to turn toggle media volume off.
•
Select
at the bottom to adjust Media, Alarm and Notification volume
levels.
.
EDA51K User Guide
,