Texas Instruments DLP5532HBQ1EVM User Manual
  1. Manuals
  2. Brands
  3. Texas Instruments Manuals
  4. Motherboard
  5. DLP5532HBQ1EVM
  6. User manual

Texas Instruments DLP5532HBQ1EVM User Manual

Evaluation module
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
www.ti.com
User's Guide
DLP5532HBQ1EVM Evaluation Module
The DLP5532HBQ1EVM Evaluation Module (EVM) is a complete electronic subsystem designed to control
the DLP5532-Q1 chipset. The DLP5532-Q1 chipset consists of the DLP5532-Q1, the DLPC230-Q1, and the
TPS99000-Q1. When combined with illumination and projection optics, RGB LEDs and a photodiode, this EVM
can be used to develop an automotive grade high brightness projector for applications such as augmented
reality head-up display (AR HUD) or other window display. This electronics EVM includes an LED illumination
driver board, which is capable of independently driving up to 10 A and 17 V per each of the three color channels.
Except for the DMD, there are no optical elements provided with this EVM. It is expected that this EVM is
procured to mount to a custom designed picture generation unit (PGU) or projector.
The DLP5532HBQ1EVM is not a production design. It is intended for evaluation only.
DLPU108 – MAY 2022
Submit Document Feedback
ABSTRACT
Figure 1-1. The DLP5532HBQ1EVM
Copyright © 2022 Texas Instruments Incorporated
DLP5532HBQ1EVM Evaluation Module
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DLP5532HBQ1EVM and is the answer not in the manual?

Questions and answers

Related Manuals for Texas Instruments DLP5532HBQ1EVM

Summary of Contents for Texas Instruments DLP5532HBQ1EVM

  • Page 1 DLP5532HBQ1EVM Evaluation Module ABSTRACT The DLP5532HBQ1EVM Evaluation Module (EVM) is a complete electronic subsystem designed to control the DLP5532-Q1 chipset. The DLP5532-Q1 chipset consists of the DLP5532-Q1, the DLPC230-Q1, and the TPS99000-Q1. When combined with illumination and projection optics, RGB LEDs and a photodiode, this EVM can be used to develop an automotive grade high brightness projector for applications such as augmented reality head-up display (AR HUD) or other window display.

  • Page 2: Table Of Contents

    Specifications......................15 List of Figures Figure 1-1. The DLP5532HBQ1EVM............................1 Figure 1-1. DLP5532HBQ1EVM Controller PCB.........................3 Figure 1-2. DLP5532HBQ1EVM Illumination Driver PCB (Top)....................Figure 1-3. DLP5532HBQ1EVM Illumination Driver PCB (Bottom).....................6 Figure 1-4. EVM Cables................................Figure 2-1. EVM Cable Connections............................11 Figure 2-2. FTDI to SPI Cable Connection..........................

  • Page 3: User Guide Overview

    This user's guide presents an overview and general description of the DLP5532HBQ1EVM and provides first steps for getting started using the EVM. 1.1 What is in the DLP5532HBQ1EVM The DLP5532HBQ1EVM consists of a controller PCB, an illumination driver PCB, cables, and a USB to SPI adapter. 1.1.1 Controller PCB...

  • Page 4: Table 1-1. Controller Pcb Ports

    On: Hold in boot PROJ_ON Off: Turn off system On: Turn on system On state is toward the outer edge of the board (Figure 1-1) DLP5532HBQ1EVM Evaluation Module DLPU108 – MAY 2022 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated...

  • Page 5: Figure 1-2. Dlp5532Hbq1Evm Illumination Driver Pcb (Top)

    Depending on operating conditions, some parts and surfaces of the PCB can be hot. CAUTION Hot surface. Contact might cause burns. Do not touch! Figure 1-2. DLP5532HBQ1EVM Illumination Driver PCB (Top) DLPU108 – MAY 2022 DLP5532HBQ1EVM Evaluation Module Submit Document Feedback...

  • Page 6: Figure 1-3. Dlp5532Hbq1Evm Illumination Driver Pcb

    User Guide Overview www.ti.com Figure 1-3. DLP5532HBQ1EVM Illumination Driver PCB (Bottom) The illumination driver PCB contains the ports listed in Table 1-4. Note that all ports with the schematic reference J20# are located on the bottom of the illumination driver PCB board.

  • Page 7: Figure 1-1. The Dlp5532Hbq1Evm

    User Guide Overview 1.1.3 EVM Cables The DLP5532HBQ1EVM kit contains the cables and FTDI USB to SPI/I2C adapter listed in Table 1-6. Figure 1-4. EVM Cables Table 1-6. EVM Cables Name Reference Quantity Micro HDMI Cable Input Power Cable...

  • Page 8: Specifications

    The controller and illumination driver PCBs have a UL flame rating of 130°C maximum. This is not a production design. It is intended for evaluation only. DLP5532HBQ1EVM Evaluation Module DLPU108 – MAY 2022 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated...

  • Page 9: Table 1-9. Typical Timing For Supported Source Resolutions

    1.2.4 SPI and I C Timing For more information on SPI and I C specifications, see the DLPC230-Q1 Automotive DMD Controller for the DLP553x-Q1 Chipset data sheet. DLPU108 – MAY 2022 DLP5532HBQ1EVM Evaluation Module Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated...

  • Page 10: Quick Start

    Quick Start www.ti.com 2 Quick Start Use the following instructions to setup the DLP5532HBQ1EVM and PC for video input and control communication. 2.1 Kit Assembly Instructions A diagram of all connections is shown in Figure 2-1. 1. Connect the controller to driver control interface flex cable to the controller PCB (J8) and the illumination driver PCB (J201).

  • Page 11: Figure 2-1. Evm Cable Connections

    Quick Start Reference letters refer to cables listed in Table 1-6. Figure 2-1. EVM Cable Connections DLPU108 – MAY 2022 DLP5532HBQ1EVM Evaluation Module Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated...

  • Page 12: Figure 2-2. Ftdi To Spi Cable Connection

    3. Connect black wire of FTDI cable (Ground) to black wire of I2C cable. 4. Connect green wire of FTDI cable (Serial In) to green wire of I2C cable. DLP5532HBQ1EVM Evaluation Module DLPU108 – MAY 2022 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated...

  • Page 13: Software Installation

    2-4). Note, the Cheetah must be connected to a computer with USB cable for it to show up in the drop-down menu. Figure 2-4. Connecting to the DLPC230-Q1 Using the DLPC230-Q1 Automotive Control Program DLPU108 – MAY 2022 DLP5532HBQ1EVM Evaluation Module Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated...

  • Page 14: Steps To Reprogram The Onboard Flash Memory

    Cheetah Adapter. 2.5 Steps to Reprogram the Onboard Flash Memory The DLP5532HBQ1EVM comes with onboard serial Flash that is pre-programmed with software and basic configuration. The software and configuration can be updated by reprogramming the serial Flash with the DLPC230-Q1 Automotive Control Program.

  • Page 15: Optical Engine Requirements And Specifications

    Optical Engine Requirements and Specifications 3 Optical Engine Requirements and Specifications The DLP5532HBQ1EVM can be coupled to an optical engine (not included) to implement an automotive interior projection system. The detailed requirements of the optical engine are beyond the scope of this document, but the optical engine have separate red, green and blue illuminators.
  • Page 16 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
  • Page 17 www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
  • Page 18 www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
  • Page 19 www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
  • Page 20 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2019, Texas Instruments Incorporated...
  • Page 21 TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2022, Texas Instruments Incorporated...

Table of Contents