Chapter 38: Replacing The Memory Fan; Procedure; Post-Requisites - Dell Alienware Area-51 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Align the tabs on the memory fan with the slots on the chassis and slide the fan until it snaps into position.
2. Replace the screw that secures the memory fan on the chassis.
3. Connect the memory fan cable from the connector on the system board. For more information on the memory fan cable
connector, see "System Board
Post-requisites
1. Replace both the left and right side-panels. See
2. Replace the stability foot.
Replacing the memory fan
computer. After working inside your computer, follow the instructions in
Components".
"Replacing the Side Panels".
Replacing the memory fan
38
After
www.dell.com/
67