Chapter 37: Removing The Memory Fan; Prerequisites; Procedure - Dell Alienware Area-51 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the stability foot.
2. Remove the left and right side-panels. See
Procedure
1. Lay the computer on the right side.
2. Disconnect the memory-fan cable from the connector on the system board. For more information on the memory-fan cable
connector, see "System Board
3. Remove the screw that secures the memory fan on the chassis.
4. Pull the release tab away from the chassis and move the fan towards the right side.
5. Lift the memory fan out of the chassis.
1. memory-fan
Removing the memory fan
computer. After working inside your computer, follow the instructions in
"Removing the side
Components".
panels".
2. release tab
Removing the memory fan
37
After
www.dell.com/
65