Replacing the right AlienFX side-panel
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Route the cable through the slot on the bracket and align the screw holes on the right AlienFX side-panel connector with the
screw holes on the bracket.
2. Replace the two screws (#6-32x6) that secure the right AlienFX side-panel connector to the bracket.
3. Align the screw hole on the right AlienFX side-panel connector assembly with the screw hole on the chassis.
4. Replace the screw (#6-32x6) that secures the right AlienFX side-panel connector assembly to the chassis.
5. Connect the cable that connects the right AlienFX side-panel connector to the I/O board. See
Post-requisites
1. Replace the left and right side-panels. See
2. Replace the
stability
foot.
36
Replacing the right AlienFX side-panel connector
computer. After working inside your computer, follow the instructions in
"Replacing the side
panels".
18
connector
After
www.dell.com/
"I/O-board
components".