Chapter 26: Replacing The Memory Modules; Procedure; Post-Requisites - Dell Alienware Area-51 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Insert the memory module into the memory-module connector until the memory module snaps into position and the securing
clip locks in place.
NOTE: The securing clips return to the locked position. If you do not hear the click, remove the memory module and
reinstall it.
1. memory module
3. notch
5. securing clip
Post-requisites
1. Replace the left and right side-panels. See
2. Replace the stability foot.
48 Replacing the memory modules
Replacing the memory modules
computer. After working inside your computer, follow the instructions in
2. memory-module slot
4. tab
"Replacing the side panels".
26
After
www.dell.com/