Chapter 36: Replacing The Front-Bezel Heat-Sensor; Procedure; Post-Requisites - Dell Alienware Area-51 Service Manual

Replacing the front-bezel heat-sensor
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Route the front-bezel heat-sensor cable through the bracket.
2. Align the tab on the front-bezel heat-sensor cable on the chassis.
3. Push the release tab on the front-bezel heat-sensor cable and press it into place.
Post-requisites
1. Replace the PCI fan.
2. Replace the left and right side-panels. See
3. Replace the stability foot.
64 Replacing the front-bezel heat-sensor
computer. After working inside your computer, follow the instructions in
"Replacing the side panels".
36
After
www.dell.com/